A Swift Xbox Red Ring of Death Fix Guide
The Xbox 360 console is a gaming system developed by Microsoft intended to compete against the Sony PlayStation. The Xbox is not perfect and has a lot of design flaws. Perhaps, the most common issue is so called “ring of death”. In reality, the Xbox red ring of death fix is an easy task even if you do not have any technical expertise.
The Xbox is a computer specially designed for gaming. All components are similar to what you would see in a desktop computer. However, they crammed into small casing that barely has any room proper ventilation and heat dissipation. The two components that can generate lots of heat are the CPU and GPU, especially when the console is used for hours and this can harm other components as well.
The lights on bezel commonly coined as rings. These rings are a tremendous help in diagnosing common problems associated with the Xbox 360. If three rings are lid up, then your Xbox 360 has general hardware issue. The troubleshooting steps of Xbox red ring of death fix can resolve this issue in an hour or less.
Once you checked the lights and it shows up as the ring of death, make sure to double check the external components as well. First off, check the wires and see if it has any cuts or physical damage that might affects its performance. Aside from the wires, you can also directly plug in the Xbox 360 directly to the wall. In addition, also make sure to try plugging in the device to different wall outlets just to make sure.
Ring of death fix also recommends checking the power brick. If your power brick is malfunctioning, it may cause the error in the event that cannot meet the power requirements of the machine to function properly. At all cost avoid placing the power brick on any fabric like surfaces. This can lead to overheating. Ventilation is very important and placing it on something that help dissipated heat will really help.
Also, check if there is any blockage in the ventilation openings or holes. If you have had your Xbox for a long time, dust can block the vents. Just blow off any dust ventilation holes. This will work for both the console and the power brick. If you know anyone who has an Xbox 360, test your console on a different power brick.
Before anything else, please note that the opening up the unit can void the warranty. If your warranty has yet to expire, make sure to bring the console back to the store or a service center. If you are not comfortable opening up the console, it is best to send the unit back to Microsoft as long as it is still under warranty. However, it might take a couple of weeks before you can get the unit back.
Before opening up the console, make sure to try removing the hard drive on the top part of the Xbox 360. Dust can build up on the contact points and it is very important to clean them once in a while. You can use a dry piece of cloth to wipe off the dust.
Once all the easy to reach components have been thoroughly checked everything and the ring of death error is still there, then that’s the time to check the components inside the console. The Xbox red ring of death fix will involve cleaning components that produce lots of heat and replacing the thermal compound or paste applied to heat sinks, specifically the ones for the processor and GPU. The best thermal compounds are the ones specifically intended for performance desktop computers.
Tags: online game, red ring of death fix, xbox repair